Click On Any Photo To See An Enlarged Photo
Shipping Cost will be determined per order and by location.

 


Button Line Holders



 		This peel and stick holder really does the job.  The Button's main body is a rugged blended nylon with UV protection.  The 1/8 in. polyester line can easily hold the big lines even when they are wet.  The best part of the Buttons is their shape.  Their flat low profile makes them perfect for mounting on the aft section of the cabin top or cabin top's backside facing the cockpit.  We are sure you will have some ideas of your own.
Special Sale Price: $3.50 for a limited time.

   
Snappers



 		Snappers for railings or stanchions are like all snappers made of the rugged blended nylon with stainless steel bolts for the attachment assembly. They secure to railing or stanchion tightly and will not slip. Snapper for railing or stanchion will fit both 7/8 in. and 1in. diameter tubing due to a removable insert in each assembly. These units attach quickly with just a screw driver. The same unit will attach to either stanchion or railing. These Snappers can be special ordered to attach to 1- 1/8 in and 1 - 1/4in. tubing. The Snapper I with railings/stanchion adapter holds 35ft. of 3/8 in. while the Snapper II holds 50 ft. of 1/2 in line. The Snapper III with the adapter holds over 100ft. of 1/2 in line.

UY202C - Snapper I - Regular with rail stanchion adapter (black) $11.50 UY205C - Snapper II - Large with rail stanchion adapter (black) $11.95 UY206C - Snapper III -X-Large with rail stanchion adapter (black) $13.95








Tillerman Rudder Lock



The Tillerman clip can be attached to the tiller with either clamps and screws. The deluxe kit comes complete with both the clamps and the screws - plus 7 feet of line, snaphooks, eyestraps, along with all attaching hardware. The standard Tillerman comes with attaching screws and line.
The attaching hardware is made of stainless steel except for the heavy duty nylon snaphooks. The Tillerman clip itself is made of plastics so rugged that it gets a 5 year replacement warranty.
The Tillerman has been helping sailors lock their tillers for over 20 years. One satisfied sailor from Cold Spring, N.Y. writes, It is an excellent device and has held up well - I use the boat 5 or 6 times a week, 7 months out of the year.

UY201A - Tillerman Rudder Lock with screws and line $16.95
UY201 - Tillerman Deluxe Rudder Lock Kit $24.95








The Wrap Mainsail Tie Down System



The Wrap is a mainsail tie down system that stays on the boom. Nothing to search for or nothing to take off and stow. The specially designed latching mechanism makes lashing down the mainsail a snap, When not tying down the mainsail, the shock cord is held up and out of the way with a mid-span steady rest clip mounted to the side of the boom. The system comes complete with shock cord, latching mechanisms, stainless steel eye straps, stainless steel attaching screws and mid-span steady rest clip.

UY701 - Wrap mainsail tie down system (up to 10 ft. boom) $ 19.95
UY702 - Wrap mainsail tie down system (up to 15 ft. boom) $ 23.95








Pole Holders



These heavy duty blended nylon pole holders can hold boat hooks, fish nets, gaffs, whisker poles, spinnaker poles, and paddles. They are excellent for holding square poles. Dense close cell foam rubber is used on the inside to make sure the pole fits snugly and does not vibrate. These pole holders will not scratch your poles. The pole holders can either attach to a flat surface or come with adapters to attach to 7/8 - 1 in. tubing such as a stanchion or railing. The same unit will attach to a stanchion or railing. These models can be special ordered to attach to 1 1/8 in - 1 ¼ in. tubing.

Pole Holders
UY902RB - Flush Mount - Black - 7/8in - 1 3/8in $7.95 (pr)
UY902RW - Flush Mount - White - 7/8in - 1 3/8in $7.95 (pr)
UY902LB - Flush Mount - Black - 1 1/2in - 1 7/8in $8.95 (pr)
UY902LW - Flush Mount - White - 1 1/2in - 1 7/8in $8.95 (pr)
UY902XLB - Flush Mount - Black - 1 3/4in - 2in $8.95 (pr)
UY902XLW - Flush Mount - White - 1 3/4in - 2in $8.95 (pr)
UY908XLB - Flush Mount - Black - 2 1/2in - 2 7/8in $10.95 (pr)
UY906XLB - Flush Mount - Black - 3in - 3 3/8in $10.95 (pr)
UY907XLB - Flush Mount - Black - 3 1/4in - 3 1/2in $10.95 (pr)
UY903RB - Stanchion/railing - Black - 7/8in - 1 3/8in $16.50 (pr)
UY903LB - Stanchion/railing - Black - 1 1/2in - 1 7/8in $17.50 (pr)
UY903LB - Stanchion/railing - Black - 1 3/4in - 2in $17.50 (pr)









Snapper III



These rugged versatile holders help organize lines or can hang a water hose on a dock post. A large rib on the underside and a 3 ½ in. diameter interior allow the Snapper III to easily hold even a heavy 50 ft. shore power cord.
The Snapper III can hold up to 60 ft. of ¾ in. line or 100 ft. of ½ in. line. You can also bunch several smaller coils into this Snapper. The Snapper III is made of a tough blended nylon with UV inhibitors to protect it from the sun.

Our Price: $6.95








Spinnaker Pole Holders



These Spinnaker Pole Holders are made of a rugged blended nylon treated with UV inhibitors to protect from the sun's rays. They attach to standard 1 in. stanchions and can be special ordered to attach to other size stanchions.
These pole holders offer the same easy lock - quick release as shown above on the Snapper III. They are sold in pairs with all attaching hardware. The package contains two ¼ in. and two 3/8 in. High density closed cell foam self adhesive strips. The ¼ in. strips are used for 3 ½ in. diameter poles, the 3/8 in. strips is used for the 3 in. diameter poles and the ¼ in. and 3/8 in. strips are combined for the 2 ½ in. poles.

Our Price: $24.95








Lead Blocks



These high strength blocks are good for leading main, spinnaker and job halyards directly to the cockpit area. These blocks have a safe working load rating of 2750 lbs. They will accommodate 7/16 in. line and 1/8in. wire.

UY404 Single Lead Block (Aluminum Sheave) $19.95
UY401 Double Lead Block (Aluminum Sheave) $29.95 UY402 Triple Lead Block (Aluminum Sheave) $34.50








Line Stoppers



Stoppers are used to increase line control and to free up winches and cleats for other purposes. Full size stoppers can be used for halyards and sheets. They come in 1,2,3, and 4 line models and can handle up to 5/8 inch line. These stoppers feature long lever handles which give more leverage when releasing the cam. The mini stoppers are designed for 3/8 inch line and close to zero. The stoppers are made of anodized aluminum with stainless steel levers.

UY307 - Vertical Single Line Stopper $29.90
UY308 - Vertical Double Line Stopper $44.30
UY309 - Vertical Triple Line Stopper $57.60
UY314 - Vertical Quadruple Line Stopper $73.90
UY351 - Mini Vertical Line Stopper $18.50
UY352P - Mini Horizontal Line Stopper (Port) $19.50
UY352S - Mini Horizontal Line Stopper (Starboard) $19.50









Handheld Electronics Holders



These UV protected electronics holders come in white flexible polyethylene and clear polycarbonate. These holders allow you to keep your GPS, cell phone, or VHF radio close by. The holders can be either tucked neatly just behind the wheel on the binnacle post or flush mounted in a variety of readily accessible locations such as just inside the companion way. Interior dimensions 4 1/2inch (h) x 2 1/2inch (w) x 2/18 in (d) Self-draining.

UY600CL - Electronics Holder (Clear Flush Mount) $9.95
UY600W - Electronics Holder (Whiter Flush Mount) $9.95
UY601CL - Electronics Holder (Clear Binnacle Mount 7/8 - 1in tubing) …..$14.95
UY601W - Electronics Holder (White Binnacle Mount 7/8 - 1in tubing) …..$14.95









Nylon Snaphooks



 		These nylon snaphooks are designed for 6mm. Line or shock cord.

UY502 - Nylon Snaphooks $1.00








The Tugger Line Tensioner



 		The Tugger is a new line tensionser that when used in conjunction with a cleat or block, gives the sailor nearly a 3 to 1 mechanical advantage. The Tugger can be used to snug up jib halyards, main halyards, downhauls and outhauls. High density polyethylene gives the Tugger high strength, and a low coefficient of friction so as to reduce line wear and drag. Requires no tools for installation. Handles 3/8in or ¼ in lines.

UY204 - The Tugger Line Tensioner $6.95 pr








Fishing Rod Holders



 		The feature that will be most appreciated is the fact that both pieces of the holder open. The fisherman simply pulls back the foam lined retaining straps, lays the rod into the holder and snaps it closed. Another handy feature is that this new fishing Rod Holder can hold both sections of the take apart rod due to the compliance of the foam liners. One satisfied boater from Wisconsin writes: several years ago I purchased several of your Fishing Rod Holders…they are by far the best holders I have ever seen. I have several on my boats…holding fishing poles…stern lights paddles, etc.

UY910 - Fishing Rod Holders
Special Sale Price $7.00 a pair for a limited time.








Shopping Items | Check Basket | Buy Goods

First Mate's Cabin
Van Buren, OH 45889
PH: (419) 299-3862
Fax: (419) 299-3032
Email: firstmatescabin@aol.com