Stainless Steel Oval Opening Ports

Luxury Stainless Steel Oval Opening Ports

To place your order two dimensions are required:
1. The port dimensions (length and width)
2. The spigot depth.
To determine the spigot depth, you need to measure the hull thickness plus any additional material including a headliner and teak or mahogany port trim.

Click here for Oval Opening Port Diagram and Specifications

Flush Mount Spigot

A clean, sleek design has been the reason for the popularity of this spigot type. Click here for a drawing of the Flush Mount Spigot Ring.

Flush Mount Spigot w/Trim Ring

The advantage to this spigot is being able to thru bolt the port to the trim ring with no fastener showing on the outside. Also, the port can be mounted to a hull thickness as little as ½ inch. Click here for a drawing of the Spigot w/Bolt thru Trim Ring.

Qty	Oval Stainless Steel Port with Flush Ring Size: 5"x12" (1-1/4 - 3-1/2" Spigots)

Qty	Oval Stainless Steel Port with Trim Ring Size: 5"x12" (1/2 - 3-1/2" Spigots)

	Size: 6"x14" (1-1/4 - 3-1/2" Spigots)

	Size: 6"x14" (1/2 - 3-1/2" Spigots)

	Size: 7"x14" (1-1/4 - 3-1/2" Spigots)

	Size: 7"x14" (1/2 - 3-1/2" Spigots)

	Size: 7"x16" (1-1/4 - 3-1/2" Spigots)

	Size: 7"x16" (1/2 - 3-1/2" Spigots)

	Size: 7"x18" (1-1/4 - 3-1/2" Spigots)

	Size: 7"x18" (1/2 - 3-1/2" Spigots)

	Size:8"x16" (1-1/4 - 3-1/2" Spigots)

	Size: 8 "x16" (1/2 - 3-1/2" Spigots)

	Size: 8"x18" (1-1/4 - 3-1/2" Spigots)

	Size: 8"x18" (1/2 - 3-1/2" Spigots)

You might also like.......

E-mail: sales@marinershardware.com

We accept the following major credit cards:

All prices are f.o.b. Petaluma, California in U.S. dollars and are subject to change without notice.
We reserve the right to alter specifications and designs without prior notice.

Updated March 2, 2005
Site Designed by AngeLydiA